EA-50 Medical waste incinerators

    Back to Medical Waste incinerator

EA-50  incinerators with three stage burning, burning rate 50 kgs/hour

EA-50 Medical waste incinerator

EA-50 incinerator are designed to burn many types of medical waste including type IV pathological waste and infectious and contaminated “Red bag” , nozzle, plastic items , plastic caps, cellulose acetate membrane electrophoresis, liquid, toilet boxes, bacteria culture, drug sensitivity reaction plate, syphilis test board, other experimental specimens, operation resection stump, organ and so on


Main componenets

 
Function high temperature  incineration for complete destruction of  hospital  waste and lab waste,imputed human organs
Waste burning capacity 50 kg per hour
incinerator design controlled air type
finish/paint high quality heat resistant, high grade epoxy paint coating
No. of burners 2pcs
temp controllers thermocouples: 02pcs
loading system manual , batch type
fuel: Nutural gas or diesel 
unit warm-up time 20 minute
residual time of flue gases 02seconds
Primary chamber
Volume for Primary chamber /Secondary Chamber /mix burning chamber 500L+ 300L+ 40L 
Waste burning capacity  50  KG per hour（daily incineration 8-12hours）
temperature of chamber More than 850℃
blower fan In primary chamber 0.55KW 
Primary chamber constructions Steel sheet 6mm, 
heat resistant paint 3cm, 
isolation bricks 12cm
non-cracking refractory bricks: 15cm 
Surface temeraturer after few hours use Below 55℃
Secondary Chamber (Post Combustion) 
temperature of chamber 900-1100℃
chamber constructions 200mm  of high thermal insulating materials, and 50mm insulator.
Burners
Nos. 2 pcs of imported famous brand(baltur)  fully automatic burners installed, one each at each chamber
Operate Operatable by single push buttons gas flow protection micro sensing
structure both burners having blower, motor overload protections, electric  spark ignition and flame sensing rod
contro safety: Emergency shut off control systems
Smoke purify chamber

Dry Method

Dry, with filter brick
Chimney
plate moterial/thickness  made of S.S
height height 9 meters
fitting fitted with shilling wires
sampling port   be fitted with sampling port for the collection and measuring of gas
Electric control panel
Digital display of temperature and set timing parameters.
having all electrical/temp control switches and gauses
mains  push on/off /emergency stop
burners/blowers push control systems
power electric voltage 380/400V , 50/60Hz
electric phase 3
Accessories
Ashes Harrow 1pc



Main Features:

Fast ,complete ,efficient waste disposal

Ø Primary chamber:0.5cubic meters

Ø Threechambers and two burner, insulated and refractory lined secondary chamber with exit temperature

   of up to 1000-1300℃with 2 secondsretention time.

Ø Easy and safe operation:

Ø With temperaturemonitoring function

Ø insulated and refractory lined chamber, and with thickness of refractory more than150mm

Ø Low temperature outside service when incineration

Ø Electric ignition and shut off. With burner slide and the burner can be take out after work finished so that to

    avoid the damage to burner.

Ø Automatic controlthe working of two burners, the water pump and the fan.

Ø Automatic display ofvoltage and current,temperature in first chamber and second chamber

Ø With secondary chamber and burner, provides a 2 second and gas retention time.

Ø Virtually smoke & smell free

Ø High temperature, refractory lining giving excellent heat retention

Ø Easy installation and maintenance–installation

Ø One year warranty and full access to technical backup and support via telephone.

Ø Worldwide coverage.